Ameripolish ColorSolve For Concrete Stain
Ameripolish ColorSolve serves as a solvent carrier specifically designed and made for use with Ameripolish Classic and SureLock concrete dyes. Utilizing ColorSolve solvent carrier for concrete dyes is exceptionally straightforward. It lowers the presence of residual dye on the surface. The application of ColorSolve solvent carrier for concrete dyes extends the dye coverage rate. It increases it to up to 1,000 square feet per gallon!
To apply Ameripolish ColorSolve, utilize an appropriate solvent sprayer, either with or without a microfiber mop. Thanks to the lower evaporation rate of ColorSolve, employing an Ameripolish microfiber mop reduces labor costs, saves time, and extends the square footage of your dye application.
Using ColorSolve eliminates the need for taping and masking areas in preparation for the dye treatment. Another distinctive feature of ColorSolve is its ability to facilitate the application of concrete dyes at higher grit levels, such as 800 and 1,500 grit. This allows for color enhancement, reapplication, and refurbishing.
Features and Benefits
- Leaves no or very little residual dye on the surface saving time on cleaning and dye expense
- Doubles the coverage rate of concrete dyes
- A lower evaporation rate allows the use of an Ameripolish microfiber mop, saving time on taping and masking
- Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing
Mix 1 gal concentrate bottle of Ameripolish Classic or SureLock concrete dyes with 1 gal RTU (3.8 L) of Ameripolish ColorSolve.
Mix 5 gal concentrate bottle of Ameripolish Classic or SureLock concrete dye with 5 gal RTU (18.9 L) of Ameripolish®ColorSolve.
Once Ameripolish ColorSolve is mixed properly with Ameripolish Classic or SureLock concrete dye, (Classic powder dye must be mixed for 2 hours before use) the mixture is then applied using an appropriate solvent sprayer with or without a microfiber mop.
