Ameripolish PG-7K Polishable Grout
Ameripolish PG-7K polishable grout coating system is a fast-setting, modified polymer, high-strength cement with outstanding bonding properties and characteristics specifically formulated to fill small cracks, pinholes, and surface irregularities in concrete floors. It also enhances the durability, gloss, and distinctness of the image (DOI) on most floors.
The PG-7K polishable grout coating system readily accepts Ameripolish concrete dyes and does not require any special polishing procedures. You must mix Ameripolish PG-7K Part A - Powder with PG-7K Part B - Liquid.
PG-7K polishable grout coating system readily accepts Ameripolish concrete dyes and requires no special polishing procedures. You must mix Ameripolish PG-7K Part A - Powder with PG-7K Part B - Liquid. Ameripolish PG-7K polishable grout coating system is suitable for use on concrete floors with pitting, holes, cracks, or surface irregularities.
Features and Benefits
- Fast-setting, high-strength cement that fills in small cracks, pinholes, and surface irregularities
- Increases durability, gloss, and distinction (DOI) on most cementitious floors
- The concrete gray color blends in with the surrounding concrete
- Readily accepts Ameripolish concrete dyes
- Easy to use 2:1 mix ratio
- Buttermilk consistency for fast and easy troweling
Available in a 20 lb. Grout Powder & 1 gal Acrylic Kit
Mix 2 parts PG-7K Part A – Powder to 1 part Part B – Liquid at 10 lbs to every gallon of Part B. Use drill and egg beater or spiral mixer to mix. Add approximately half the liquid to the powder and mix until creamy and lump free. Add remaining liquid and mix until uniform. Properly mixed product should have the consistency of “buttermilk” or “light cream”.
Ameripolish PG-7K polishable grout coating system coverage varies considerably from floor to floor. PG-7K polishable grout coating system will typically cover 2,500 sq ft
